How to customize your Yamaha fairings

How to customize your Yamaha fairings? 

Well, all the bike enthusiasts love to spend time while maintaining their bikes. When you pick the fairings to make the performance of your bike better, you can also use your creativity to customize the bike fairing. What can be better than adding your creativity and personal touch to your motorcycle? Wouldn’t it be great? Well, yes, it is. As soon as you start thinking about customizing your Yamaha r6 farings, it would help if you also thought of how to do it. 

So, here we will be discussing how to customize your bike fairings. There are a lot of cheap motorcycle fairings available. However, you need to look for the one that fits well with your bike. 

Choose where to paint 

When you are planning to paint your bike fairings, you need to pick the area that needs to want to paint. However, the area that you want to customize needs to be prominent. If it is not visible, there is no point in customizing it. 

Set aside the part you want to customize 

Now that you have picked the area, you will have to make sure that the pain does not go everywhere. Therefore, you must choose and set aside the domain that you want to paint. 2007 gsxr 600 fairings,Setting the fairing aside will help you with painting and customing it easily. Moreover, the other parts will also be safe from an unnecessary mess. 

Use the sandpaper to sand down 

Now that the fairing has set aside, you can now use the sandpaper. Use the sandpaper on the surface of the bike fairing. After you have done that, you will have to wipe out all the residue of the sandpaper. 

Smoothen the surface 

When you have done with the sanding of the fairing, you can now use the body fillers to smoothen the surface of the fairing. Once the area has smoothened, you can now wait for the fillers to dry. Once the fillers are dehydrated, you again have to use the sandpaper to sand the surface. 

Now the painting begins! 

Once you have done all the other steps, you can now prepare to paint. You will have to clean the spray gun first. Cleaning is to make sure that there is no paint residue remaining from the last time spray gun had used. Now, you will mix the paint and the thinner. You can spray three to four layers of this paint. Let the paint dry out. Now, it is time to use the primer. You can do it with the same spray gun. After applying the primer, you can now move on to the next step. You will have to use the thinner with the help of a piece of cloth to wipe the newly painted surface. And finally, you can now apply the final coat of paint on the Yamaha r1 fairings

These are some of the natural and straightforward steps to paint the motorcycle fairings.